8GPU K86 Mining Rig

(Total 0 Products)

The GPU slot spacing of this product is 65MM, and the thickness of your graphics card should not exceed 60MM to ensure the normal heat dissipation of the graphics card.

Eth Mining Rig, including: Motherboard, Intel CPU (with CPU cooler), 4G RAM, case fan, 6 PIN cable to (6 + 2) Pin * 8pcs, , screws Package, win10 system. installation instructions
GPU Port Gap: the port gap between GPUs is 65mm, you can put 8pcs GPUs on the motherboard at the same time if your GPU thickness is less than 60mm, otherwise you will just put only less than 4pcs GPUs on the motherboard at the same time.

Low comsuption: the gpu mining rigs system comsuption is less than 150watt. Good cooling: 3pcs 120mm fan to make sure very good cooling, Case Size: 25.6*15.7*5 Inch, Cooler Fan: 120mm, 5500rpm

Applicable graphics card: NVIDIA: 2070/2080/2060S/2070S/2080S/1080TI/3070/3060TI/3080/3090 AMD: 5600XT/5700/5700XT/6800/6800XT/6900/6900XT/VEGA56/ etc.
Noise: 70 decibels

No-load power: 150W

Configuration parameters:
CPU: Intel G2950 3.2G
Motherboard: Intel-HM86
Memory: 4gb ddr3
PCIe: GEN3
Software: Windows 10(inactivated)
Built-in interface: 1X MSATA 1 X4G DDR3L 8PCIe X1 GEN3
External interface: 1 VGA (and HDMI adapter cable) 1GB network interface USB 2 2.0

Power interface: 10X6pin

Applicable mining:
ETH/ETC/AE/BTM/GRIN/GRIN31/BEAM/SERO/RVN/MONA/CKB/XVG/BCD/FIRO/HYC/VTC/CLO/RVC/PGN/CHI etc.